Marshall RF1

Marshall RF1

Marshall RF1 Description:

The Reflector pedal is a stereo reverb pedal offering a maximum delay time of 2000ms. From a spacious hall to the sound of a studio plate via the pulsing of a vintage spring,

The Reflector recreates six different reverb modes for you to explore giving you full control over the reverb time, damping and level of every mode.

The Reflector's dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or allowing the pedal to spill-over allowing your reverb tails to naturally die away.

Combined the outputs create a stereo reverb effect creating a wide spacious field.Below is a complete run down of the Reflector's features for your information.

We have also enclosed a number of suggested settings to help guide you. It should be remembered that these are only suggested settings and you should really experiment as much as possible.

Marshall RF1 Features:

• 'In' Jack Socket
• 'Expression' Socket
• 'Out 1 / Left' Jack Socket - Passive Bypass
• 'Out 2 /Right' Jack Socket - Spill-Over
• Mode
• Reverb Time
• Damping
• Level
• Foot Switch
• LED
• DC Input

Battery Replacement

• To replace the battery, open the easily accessed coin screw battery cover plate by loosening screw as shown, then disconnect the battery connector lead.
• Use PP3 or equivalent battery (for improved battery life use alkaline type).
• Always ensure that the battery is removed when the pedal is not in use for long periods.
• Dispose of old battery in a safe place.

Marshall RF1 Specifications:

• Power: 9V DC Centre Negative Regulated
• Minimum Current Draw: 80mA
• Controls: Mode, Reverb Time, Damping, Level
• Switches: On/Off Switch
• Indicators: On/Off LED
• Jacks: 2 Input, 2 Output 'Jack sockets'
• Input Impedance: 1M 1/2
• Output Load Impedance: 1k 1/2
• Dimensions: 120mm x 65mm x 55mm
• Weight: 510 grammes

Get your Marshall RF1 today!